View SF2076B_7866134.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? preliminary rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 1 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demo nstration board with impedance matching to 50 w and measured with 50 w network analyzer. 2. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depende nt on pcb layout and external impedance matching design. see application note no. 42 for details. 3. the design, manufacturing process, and specifications of this filter are subject to change. 4. tape and reel standard ansi / eia 481. 5. us and international patents may apply. 6. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 7. ?copyright 1999, rf monolithics inc. 8. electrostatic sensitive device. observe precautions for handling. electrical characteristics characteristic sym notes min typ max units nominal center frequency f c 1 464.000 mhz insertion loss 9.5 10.5 db passband variation; cf 1.70 mhz 0.7 1.5 db p-p cf 1.85 mhz 3 group delay variation; cf 1.7 mhz 200 300 nsec return loss 10 db triple transit (reference to time domain main lobe peak) 33 35.6 after 1-2us 10 11.8 after 2-3us 33 35.7 after >3us 40 43.2 rejection dc to 264 mhz 30 db 264 to 368 mhz 40 368 to 424 mhz 50 424 to 460.65 mhz 40 467.35 to 664 mhz 40 664 to 954 mhz 30 maximum peak rf input power 13 dbm maximum rf input power over life 10 dbm life of part 25 years temperature operating -40 85 c storage -40 85 case style smp-03 7 x 5 mm nominal footprint lid symbolization (yy=year, ww=week, s=shift) rfm SF2076B yywws smp-03 ? designed for 802.16 and wimax receiver if application ? low insertion loss ? 5.0 x 7.0 mm or single ended surface-mount case ? differential input and output ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +13 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c suitable for lead-free soldering - max soldering temperature 260c for 30 s 464.00 mhz saw filter SF2076B pb i. 200 ohm matching .............................page 2 ii. 200 ohm matching toko inductor .....page 5 iii. smi 7035 matching ........................page 8
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 2 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 sf2070b c1 6.8pf c2 6.8pf l1 27nh l2 24nh l3 33nh l4 30nh tx1 tx2 0 0 0 0 sf2070b demo schematic ch1 s21 log 10 db/ ref -11 db center 464 . 000 000 mhz span 20 . 000 000 mhz sf2070b demo2 cor prm 22 apr 2005 12:15:05 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz max ref=1 ch1 markers bw : 4 . 263507 mhz cent : 464 . 026183 mhz q : 108 . 84 1_ loss : -10 . 788 db i. impedance matching for 200 ohm differential impedance: coilcraft inductors (saw matched to 200 ohms balanced, 4:1 transformers account for 2db of loss) part value manufactureer part # rfm part # qty. pcb na custom built for rfm 400-1608-001 1 l1 27 nh coilcraft 0603cs-27nxjb, 0603 size na 1 l2 24 nh coilcraft 0603cs-24nxjb, 0603 size na 1 l3 33 nh coilcraft 0603cs-33nxjb, 0603 size na 1 l4 30 nh coilcraft 0603cs-30nxjb, 0603 size na 1 c1, c3 6.8 pf murata grm1885c1h6r8cz01d 500-0621-068 2 c2 .5 pf murata grm1885c1hr50cz01d na 1 xfmr1, xfmr2 4:1 ratio mini circuits adt4-1wt 500-0912-001 2 j1, j2 female sma m/a com 2052-0000-00 500-2048-001 2
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 3 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 ch1 s21 log 2 db/ ref -13 db center 464 . 000 000 mhz span 20 . 000 000 mhz sf2070b demo2 cor prm ch2 s21 del 100 ns/ ref 500 ns cor smo prm 22 apr 2005 12:11:42 1 2 2 : - . 34620 db 3 . 769 774 mhz ref=1 ch1 markers mean : -11 . 857 db s . dev : . 61390 db p-p : 1 . 8839 db 1 2 2 : -116 . 21 ns 3 . 769 774 mhz ref=1 ch2 markers mean : 579 . 44 ns s . dev : 70 . 857 ns p-p : 365 . 58 ns i. impedance matching for 200 ohm differential impedance: coilcraft inductors (saw matched to 200 ohms balanced, 4:1 transformers account for 2db of loss)
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 4 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 ch1 s11 1 u fs center 464 . 000 000 mhz span 20 . 000 000 mhz sf2070b demo2 cor prm ch2 s22 1 u fs cor smo prm 22 apr 2005 12:09:59 1 1 : 51 . 678 18 . 072 6 . 1989 nh 464 . 000 000 mhz 1 1 : 50 . 158 23 . 016 7 . 8945 nh 464 . 000 000 mhz i. impedance matching for 200 ohm differential impedance: coilcraft inductors (saw matched to 200 ohms balanced, 4:1 transformers account for 2db of loss)
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 5 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 ch1 s21 log 10 db/ ref -20 db start 459 . 000 000 mhz stop 469 . 000 000 mhz cor hld prm 23 mar 2006 09:49:17 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz ref=1 ch1 markers bw : 3 . 991976 mhz cent : 463 . 966912 mhz q : 116 . 22 1_ loss : -12 . 581 db ch1 pass SF2076B demo using toko inductors full 2-port cal, -1.5 db bw actual loss about -10.581 db due to transformer loss full ii. impedance matching: toko inductor 200 ohm differential impedance (4:1 transformers account for 2db of loss) SF2076B 1:4 c1 l1 l2 j 1 j 2 l3 l4 c3 c2 4:1 xfmr1 xfmr2 all other pins ground 10 6 1 5 part value manufactureer part # rfm part # qty. pcb na custom built for rfm 400-1608-001 1 l2-l4 27 nh toko ll 1608-fsl27nj na 4 c1, c3 6.8 pf murata grm1885c1h6r8cz01d 500-0621-068 2 c2 .5 pf murata grm1885c1hr50cz01d na 1 xfmr1, xfmr2 4:1 ratio mini circuits adt4-1wt 500-0912-001 2 j1, j2 female sma m/a com 2052-0000-00 500-2048-001 2
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 6 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 ch1 s21 del 50 ns/ ref 548.7 ns ch1 center 464 . 000 000 mhz span 10 . 000 000 mhz cor smo prm ch2 s21 log 1 db/ ref -14.5 db ch2 center 464 . 000 000 mhz span 20 . 000 000 mhz cor prm 23 mar 2006 09:14:31 1 2 2 : 21 . 057 ns 3 . 400 000 mhz ref=1 ch1 markers mean : 572 . 82 ns s . dev : 38 . 085 ns p-p : 151 . 48 ns 1 2 2 : - . 01250 db 3 . 400 000 mhz ref=1 ch2 markers mean : -12 . 530 db s . dev : . 10840 db p-p : . 62010 db SF2076B demo using toko inductors ch1 full 2-port cal, ch2 thru cal full resp ch1 s21 log 10 db/ ref -14.5 db center 604 . 000 000 mhz span 700 . 000 000 mhz cor prm 23 mar 2006 09:01:41 SF2076B demo using toko inductors thru cal resp ii. impedance matching: toko inductor 200 ohm differential impedance (4:1 transformers account for 2db of loss)
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 7 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 ch1 s11 1 u fs center 464 . 000 000 mhz span 10 . 000 000 mhz cor prm ch2 s22 1 u fs cor prm 23 mar 2006 08:50:28 1 1 : 43 . 766 27 . 084 9 . 2900 nh 464 . 000 000 mhz 1 1 : 43 . 896 14 . 471 4 . 9635 nh 464 . 000 000 mhz SF2076B demo using toko inductors full 2-port cal full full ch2 s21 log 10 db/ ref -14.5 db start 0 s stop 4 us cor prm 23 mar 2006 09:21:14 1 2 3 4 5 1 : 0 . 0000 db 0 s ref=1 ch2 markers 2 : -23 . 707 db 1 . 06 us 3 : -32 . 849 db 2 . 346 us 4 : -40 . 680 db 3 . 089 us 5 : -39 . 094 db 1 . 17 us SF2076B demo using toko inductors thru cal resp ii. impedance matching: toko inductor 200 ohm differential impedance (4:1 transformers account for 2db of loss)
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 8 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 iii. impedance matching on smi radio board: smi7035 (200 ohms differential)
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 9 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 iii. impedance matching on smi radio board: smi7035 (saw matched to 200 ohms balanced)
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 10 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 smp-03 case recommended pcb footprint case dimensions dimension mm inches min nom max min nom max a 6.80 7.00 7.20 0.268 0.276 0.283 b 4.80 5.00 5.20 0.189 0.197 0.205 c 1.50 1.65 2.00 0.059 0.065 0.079 d .47 0.60 .73 0.019 0.024 0.029 e 2.41 2.54 2.67 0.095 0.100 0.105 h 0.87 1.0 1.13 0.034 0.039 0.044 j 4.87 5.00 5.13 0.192 0.197 0.202 k 2.87 3.00 3.13 0.113 0.118 0.123 p 1.14 1.27 1.40 0.045 0.050 0.055 materials solder pad termination au plating 30 - 60 inches (76.2-152 m) over 80- 200 inches (203-508 m) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phosphorus) 100-200 inches thick body al 2 o 3 ceramic pb free electricalconnections connection terminals port 1 input or return 10 return or input 1 port 2 output or return 5 return or output 6 ground all others single ended operation return is ground differential operation return is hot a b c h e p d h j k 10-terminal ceramic surface-mount case 7 x 5 mm nominal footprint
464.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 11 of 11 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2076B-062106 tape and reel specifications ?b ? nominal size quantity per reel inches millimeters 7 178 500 13 330 2000 user direction of feed component orientation and dimensions see detail "a" 13.0 20.2 2.0 12.0 100 ref. "b" ref. pin #1 carrier tape dimensions tolerance ao 5.5 mm 0.1mm bo 7.5 mm 0.1mm ko 2.0 mm 0.1mm pitch 8.0 mm 0.1mm w 16.0 mm 0.2mm

▲Up To Search▲

Price & Availability of SF2076B

	To Download SF2076B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .